LIVE Oncology-pharma freight · 9,000+ verified pickups How it works Platform Contact
Live on oncology-pharma freight · 9,000+ verified pickups Book a demo
Pickup verification

Know the truck at your dock is the one you booked.

Carrier vetting confirms who you hired. A gate check confirms a person and a piece of paper. Neither confirms the vehicle reversing onto your dock. Stower checks the tractor, the trailer and the location against the booking — in under two minutes, before the freight leaves.

Live today on oncology-pharma freight

app.stower.ai/pickups/SH-48217
SH-48217
Dock 7 · Illustrative data
Verified
CarrierCarrier 04matches tender
Tractor1FUJGLD···8821tag on label
TrailerTN·4471tag on label
LocationDock 7 fixed tagscanned on site
Arrived11:40:52
Verified11:42:06
Departed12:06:18
Verify pickupSH-48217
1:12left
✓LocationDock 7
✓Tractor8821
TrailerTap to scan
Hold phone to tag
9,000+Verified pickups
50Facilities shipping
32Carriers onboarded
0Mismatches at the gate
30sAdded per collection
9,000+

Pickups verified on live oncology-pharma freight since launch.

Verified pickups
<2 min

For the driver to prove truck, trailer and location at the dock.

Per check
$0

What carriers pay. The driver app is free, so adoption is never a negotiation.

Carrier cost
Why it exists

Every check you run happens before the truck arrives, or after it has gone.

Fictitious pickup works because nothing in the chain looks at the vehicle itself at the moment it matters. Here is what each control actually covers.

Carrier vetting

Checks the carrier you booked, at booking, against a database. It cannot see who actually arrives three days later.

Driver ID at the gate

Checks a person and a piece of paper. Both can be produced by anyone holding the pickup number.

GPS trackers

Tell you where the trailer went — after it has already left your yard with your freight on it.

Stower

Checks the vehicle itself, at your dock, against your booking. The tag cannot move to another truck without being destroyed.

The platform

One record of what actually arrived, shared by everyone on the load.

A shipper, a broker and a carrier each hold a different piece of the truth. Stower is where those pieces are checked against each other.

Verified pickups

Proof while the trailer is still in your yard

Every pickup becomes a record: which carrier arrived, which tractor and trailer carried it away, at which dock, at what time. Ready for a claim or an audit without reconstructing anything from phone calls.

  • Carrier checked against the tender, not a database snapshot
  • Tractor and trailer identified by their own federal certification labels
  • Arrival and departure timestamped at the dock
See how it works →
app.stower.ai/pickups/SH-48217
SH-48217
Dock 7 · Illustrative data
Verified
CarrierCarrier 04matches tender
Tractor1FUJGLD···8821tag on label
TrailerTN·4471tag on label
LocationDock 7 fixed tagscanned on site
Arrived11:40:52
Verified11:42:06
Departed12:06:18
Exceptions

A mismatch stops the load, not a report next week

If the carrier, the vehicle, the day or the location does not line up, nothing is confirmed and your team is told at the gate — while the freight is still yours.

  • Held at the gate, with the reason in plain language
  • Cleared exceptions stay on the record for the audit trail
  • No partial pass: a failed check is never treated as a pass
See how it works →
app.stower.ai/exceptions
Exceptions
Caught at the gate, before the load moved
3 open
SH-48210 Tractor tag registered to another carrier · Memphis DC Held
SH-48196 Trailer tag does not match the sealed trailer · Dock 3 Held
SH-48184 Location tag not scanned inside the window · Dock 7 Review
SH-48171 Arrived one day early for a scheduled pickup · Dock 1 Cleared
SH-48160 Driver phone lost signal mid-check, re-scanned · Dock 7 Cleared
Locations

One fixed tag per dock, and we install it

The location tag is what proves the driver is physically at your site. We ship it, walk your team through placing it, and every driver scans it from then on.

  • A tag that ever moves shows up immediately
  • Works for your own docks and for your carriers' yards
  • Nothing for your gate staff to do at pickup
See how it works →
app.stower.ai/locations
Tagged locations
14 docks live · 2 awaiting install
14 live
NASHVILLE DC
MEMPHIS
LOUISVILLE
ATLANTA · PENDING
Vehicle setup

A person approves every tag before it works

A tag goes live only after a reviewer has watched the unbroken video of it going onto that specific vehicle's certification label, and the sealed code has been matched.

  • Filmed in one take on the driver's phone
  • VIN read from the label and checked against the carrier's registration
  • Unclear footage is sent back, not waved through
See how it works →
app.stower.ai/vehicles/review
Tag setup review
Carrier 04 · tractor 8821
Awaiting review
0:41 · ONE TAKE
✓VIN on the certification label is readable1FUJGLD8821
✓Tag reported sealed before it went onverified
✓Cover peeled on camera, code revealedmatches
Reviewer approvalpending
Approve & activateSend back
Your exposure

What a fictitious pickup would cost you.

Move the sliders to your own numbers. Nothing is sent anywhere — this runs in your browser.

Outbound loads per month400

Across every facility you ship from.

Average value per load$90,000

Replacement value of the freight, not the freight charge.

Loads lost to fraud, per 10,0006

Your own assumption. Set it to whatever your claims history shows.

Expected annual loss
$259k

At the rate you set — before claims handling, recovery, or what it costs you when a regulated product cannot be accounted for.

Freight value moved each year
$432M

What leaves your docks annually at the volumes above.

Pickups verified instead
4,800

Each one a timestamped record of the vehicle that actually collected.

The fraud rate is yours to set — Stower does not publish an industry figure and this calculator does not assume one. Figures are indicative and not a guarantee of recovery.

How it works

Three phases. One tag per vehicle, one per dock.

The work is front-loaded and we do most of it. After setup, a pickup is a single scan on the driver's own phone.

CERTIFICATION LABEL VIN 1FUJGLD REC

The tag goes on the truck, on camera

The driver scans the sealed tag to begin. Filming starts there and does not stop until the tag is on the vehicle and its code has been revealed.

  • Scan the sealed tag — filming starts at that moment
  • Apply it across the edge of the vehicle's federal certification label
  • Peel the cover on camera so the code underneath is revealed
When  ·  Once per vehicle

How setup works →

A and B happen once per vehicle. C happens at every pickup, in under two minutes.
Where you sit

What it means for each side of the load.

Shippers & facilities

One fixed tag per dock, installed by us. Nothing new for your team at pickup — the driver does the scanning. You get proof before the load leaves your yard.

Brokers

You already create the shipment. The verification runs off that tender, and you get evidence of which carrier's vehicle actually collected, with the time.

Carriers

Free, always. One scan instead of a clipboard, and a timestamped arrival and departure record of your own for when detention is disputed.

Resources

Background reading.

Trailers in a yardSwap: article image
Guide

How fictitious pickup actually works

The sequence an impostor follows, and the specific point in it where a document check stops being useful.

Read the guide →
An aerial view of a distribution centreSwap: article image
Compliance

What 21 CFR 1301.74 expects of you

Selecting carriers that provide adequate security, and what that means once the freight is on the dock.

Read the note →
A loading dockSwap: article image
Case study

9,000 pickups on oncology-pharma freight

What changed at the gate, what it cost the carriers, and what the record looks like when a claim lands.

Read the story →
Book a demo

See it on a live pickup.

Fifteen minutes is enough to walk you through a real one. Tell us a little about your operation and we'll set it up.

Or email hello@stower.ai · (508) 319-1837